| 1. | Study on the key techniques of the imaging infrared guidance for aam
空空导弹红外成像制导关键技术分析 |
| 2. | Countermeasure models of infrared guidance and imaging infrared guidance are constructed respectively
针对点源制导与成像制导分别建立了干扰仿真模型。 |
| 3. | In the middle or late of 1970s " , with the great development of infrared detection technology and the successful use of miniature infrared optic scanner , the infrared guidance technology has gained great improvement
在70年代中后期，红外探测器技术有了大的发展，尤其是小型化红外光机导引头的成功开发，使红外制导技术有了重大发展。 |
| 4. | The hardware - in loop simulation of ir imaging guidance missiles is an advanced technique in studying and developing infrared guidance system . it is also a quick , economy and effective means in appreciating the performance of ir imaging guidance missiles
红外成像导弹半实物仿真技术是研究和发展红外寻的制导系统的一项先进技术，为鉴定成像制导导弹的性能提供了快速、经济而又有效的手段。 |
| 5. | 5 finally , the demonstration and simulation of the multiple element detector system are realized on the basis of visual c + + . the result shows that the design of hardware and software can realize the demands of the infrared guidance missile system by high precision and high speed simultaneously
5 、最后，在visualc + +实现的基础上，针对红外多元探测器的工作原理以及抗干扰算法，进行了软件上的动态演示和仿真。 |
| 6. | Infrared ( ir ) image synthesis and multi - spectral information fusion are the key techniques in current high scientific and technological countermeasure environment and have been found wide application in many domains such as infrared guidance & countermeasure , anti - terrorism , remote sensor detection , traffic safety , etc . in this dissertation , the infrared image synthesis for ground targets and the realistic fusion of multi - spectral images are studied
红外成像仿真和多光谱信息融合是现代高科技的关键技术之一，在红外制导与对抗、反恐怖活动、遥感探测、交通安全等众多领域有着广泛的应用。本文主要研究地面目标的红外成像仿真和多光谱成像的真实感融合。 |
| 7. | 3 the design principle and scheme , the choice of hardware , the program of software and the connection of module are given in detail . 4 some methods of improve the infrared guidance missile ' s probability of against infrared decoy using the four element detection system are proposed , after analyzing the specialty of some kinds of infrared jamming
4 、针对红外多元探测器系统的特点，通过分析各种红外干扰源的工作原理，以及干扰源和目标在光谱特性、形状大小和运动特性等方面存在差异，提出了几种提高此型红外导弹抗干扰性能的算法。 |
| 8. | In this paper , we focused on the application research of the multiple element detector , which is used some type of infrared guidance missile . in view of the digital signal processor , the theoretical study , the scheme for application and the simulation research of this infrared guidance system is studied in detail
针对某型采用红外多元探测器进行目标探测的红外制导导弹系统，本文深入、系统地分析和研究了红外多元探测器的工作原理，并从数字信号处理器( dsp )实现的角度，着重开展了有关利用数字信息处理技术进行目标的位置偏差解算算法以及提高此型导弹的抗干扰能力方法的研究。 |
| 9. | The main contributions are showing as follows : 1 based on the theory and specialty of four - element and infrared guidance system , a new method of calculating the relative location of the target and forming the instruction for the infrared missile to tracing the target is proposed in this thesis
本论文主要成果和创新性工作如下： 1 、针对红外多元探测器的工作原理和结构特点，结合红外制导导弹系统的结构、原理，提出了利用红外多元探测器提供的信息解算目标位置并形成相应控制指令的方法。 |
| 10. | A simulation of an imaging infrared guidance missile tracking a airplane is described . the dynamic images are produced by programming and are merged with real background ir images which were recorded by infrared camera . the merged images simulate the scene ' s infrared image at the entrance of real seeker
本文主要探讨了动态红外图像的计算机生成技术，仿真了红外成像制导导弹跟踪飞机目标的全过程，用软件编程实现了目标动态红外图像的生成，并与红外摄像机拍摄的真实背景红外图像进行合成，模拟出真实导引头视场中场景的红外图像。 |
